philipp
31.10.2016, 10:21
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_image1.jpg
http://rolexpassionreport.com/wp-content/uploads/2016/10/slider_checklist_value_vintage_rolex.jpg
CHECKLIST to determine the condition of your vintage Rolex.
Before even considering zooming in on details, your first look should always be at the so- called matching all over patina. If a certain part of the watch, e.g. the case, shows clear traces of wear and tear, this should match with the condition of the watch in other places such as the dial, inlay, etc.
If something is not right appearance wise, then this is a clear giveaway the watch has been serviced or has been messed with to cover up its authenticity and originality. To make your assessment easier, I’ve composed a checklist of things to look out for when analysing a vintage Rolex. The list is broken down in case, dial and bezel parts. In my “Vintage Rolex Buyers Guide” you find all details per categorie.
If you systematically work through the list of details, you should be able to come up with a straightforward conclusion on the condition and originality of the watch at hand. At the end of this article you find an overview of the checklist!
Determining originality
Let’s take a closer look at the case to determine the originality of the watch and its condition. Many factors may influence if a case is still in an original state and what has been done to it by wearing and/or servicing it. Eying the case and comparing it with the rest of the watch, the challenge is to spot any discrepancies in the story the watch might tell you. Experience over the years has taught me that even a heavily worn watch always keeps its original shape. Obviously, there will be traces of wear at the edges but in general the shape should still be ok.
It’s all about the polish
One of the first things to look for is if the case has been polished. An unpolished case is more and more becoming a rare find these days, because it means the watch most likely has never been serviced. Polishing was part of service maintenance and as each watch officially had to be serviced regularly due to the replacement of lubricating oil inside the movement, many watches probably will have been serviced at one point in time. The purpose of servicing a watch was also to maintain the high standard Rolex always aimed for.
CASE
-Magnify the matt parts of the case
-Magnify lugs, font and back
-Magnify bevelled edges between matt part and middle case
-Case back engravings worn out
-Hallmarks on back of lugs worn out but fresh case
-Satin polish: difference case back inner circle and outer rim
-Missing straight fine lines
-Missing sharpness on edges of lug holes
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_How_to_polish_rolex.jpg
Unpolished
In case you are not sure how a certain reference should look like unpolished, take a close look at the matte part of the watch with a suitable magnifier. The matte parts will tell you if a watch has been polished or not. Below I will post some pictures from unused vintage Rolex so you can compare yours with. Here’s a unpolished like new small crown Ref 5508. Focus on the edges…
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_5508_unpolished_smallcrown_rolex.jpg
Every angle is still sharp, the side from the bezel, no marks on the crown or side of the case and also not on chamfer of the bevel.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_smallcrown_5508_unpolished_rolex.jpg
In case you are not sure how a certain reference should look like unpolished, take a close look at the matte part of the watch with a suitable magnifier. The matte parts will tell you if a watch has been polished or not…
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_unpolished_5508_submariner_rolex.jpg
A unused bracelet is still stiff, you need to bend the links. When removing the band with the push pins before polishing, it will always leave trace marks on the case. That is why the lugs are often sealed with tape before band removal. A clear sign of a service polish are the drilled lug holes, or better yet the sharpness of the lug hole edges. Because once polished, these lug holes will lose the original sharp edges.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_NOS_5508_submariner_rolex.jpg
Following is a GMT Ref 6542 also unpolished and unused. Hard to believe that these almost 60 year old Rolex have been tucked away and now see the daylight. In a scale of impossible to find these unused miracles are listing top position. Collectors grail.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6542_nos_bevel.jpg
Another part to check if a watch has been polished are the chamfers, the bevelled edges between the matte part and the middle case. Tool watches like the Daytona or dresswatches like the DateJust and Daydate did not have chamfers. You will only find them on the Submariner , Milgaus, GMT-Master and Explorer II. Perhaps because of this rarity and value, bevels are particularly loved by vintage collectors. A bevel was merely for esthetical purposes. Each model had its own bevel, the bevel on the GMT-Master was a bit smaller than the Submariner one. This has to do with the fact that the Submariner model was thicker than the GMT-Master and the Submariner winding crown larger.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_polished_rolex.jpg
Little less rare are those unused, NOS (New Old Stock) Rolex from the 70-80-ids. Here’s a NOS Ref 6263 Daytona. Note the sharp bezel and all edges. There are professional polishers who take the whole watch apart when trying to polish it back to Rolex standard. This will inevitably cause loss of material, unless the polishing has been done very lightly. Not easy, as it requires highly developed polishing skills because you only get one shot. If it goes wrong, the transition in polish is clearly visible. But if you get it right, it is harder to detect with the naked eye.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_unpolished_rolex_cosmograph_6263.jpg
Another indicator if a watch has been polished or not, is by looking at the fine lines on a watch. If these are not straight, the polishing has been done by hand. Unpolished watches only have a manufacture polish, meaning the case has a satin polish that was done at the Rolex factory before all parts were assembled
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6263_rolex_daytona_unpolished.jpg
Every place where wear and tear could happen is still unused, the crowns, the case back, the lugs, the sides, bracelet, crystal. If you compare the case with the band, you will often see a difference in finish because the band is easier to polish than the case. The lugs are especially difficult to handle, so this is an area that requires extra attention with your magnifier. While attempting to make the case matte again, there will always be a 1mm spot against the edge, impossible for a polishing machine to reach. In fact, you could only do a proper polishing job by taking the whole watch apart.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6263_unpolsihed_rolex_daytona.jpg
Wear indicators case side
-Original crown or replacement
-Replacement crown periodically correct
-Magnify pushers if present
-Magnify top left lug for heaviest wear (left wrist watch wearers)
-Magnify below lugs for end link scratches
-Magnify below lugs for dirt/dust
http://rolexpassionreport.com/wp-content/uploads/2012/02/16808_nos_061.jpg
A used but unpolished gold Rolex Submariner Ref 1680 nipple dial. With gold cases it’s very easy to see if they are polished or not. One complicating factor in assessing the polishing of a case, is that the satin factory polish has become more coarse over the years, if you compare models of the 1950s/1960s/1970s. I believe this has to do with the fact that production numbers rose rapidly and less time was spent on the finish of a watch due to the introduction of machine polish and laser check.
http://rolexpassionreport.com/wp-content/uploads/2012/02/16808_nos_02.jpg
When polished, the back of the lugs will often have the same round finish as the case. You would expect this finish on the inner circle of the case back as well, but this will be sealed with tape during polishing. Still, you can always feel the difference between the factory satin polish and service polish if you go from the inner circle to the outer polished rim.
Wear indicators case back
-Magnify screw thread for frequent opening of case
-Original rubber sealing ring present
-Original rubber sealing ring or replacement
-Tarnish on screw thread
-Magnify case back for service codes
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_IMG_3638.jpg
In below ref 6200 Big Crown case back you don’t find any little service marks engraved as you see above, instead you see that the automatic rotor left a circled mark in the case back.
http://rolexpassionreport.com/wp-content/uploads/2016/05/RPR_6200_caseback_RPR.jpg
Wear indicators glass
-Original crystal?
-If original, is there any ‘icing” visible
-Is it a later service crystal with sharp edge
-Correct crystal type corresponds with model
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6200-PST-LR-25.jpg
Above original Crystal on the left with lots of radium dust in there, be careful!
http://rolexpassionreport.com/wp-content/uploads/2016/01/RolexCrystal_19.jpg
In below A/6538 Military Bg Crown you see the ‘icing’ in the crystal..
http://rolexpassionreport.com/wp-content/uploads/2016/02/RPR_Iced_A6538.jpg
Wear indicators movement
-Patina movement corresponds with patina watch
-Magnify screw near crown for damage, those are often used to get the movement out of the case
-Magnify the screws that hold the movement in it’s place, in below example at the edge in the middle of
the lugs.
-Magnify small screws for tarnish and if they have been used. Often a used one will show you burr on
the screw.
-Examine the screw thread. Often the rubber seal shows you wear. Also salt water will leave marks clearly visible.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6542_nos.jpg
Above the unused Ref 6542 case back inside and movement, which still looks like new. Below a patinated and used movement..
http://rolexpassionreport.com/wp-content/uploads/2016/05/RPR_6200_movement_RPR.jpg
Serial Number
-Serial Number present
-Magnify Serial Number for clear engraving
-Worn out Serial Number corresponds with worn out case
-Serial Number matching with model
-Serial Number matching with production date inside case back
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_1665_serialnumber.jpg
Reference Number
-Reference Number present
-Magnify Reference Number for clear engraving
-Worn out Reference Number corresponds with worn out case
-Reference Number inside case back matching with number in between lugs
-Reference Number matching with model
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_IMG_5440.jpg
DIAL
Luminous
-Type of luminous matching with period of model:
-Swiss print with Radium luminous
-Swiss + ! with lower Radium luminous
-Swiss + _ with Tritium luminous
-Magnify for Golden Swiss, white Swiss, double Swiss corresponds with period of model
Swiss – T<25 / T-Swiss-T / T-Swiss-T<25 corresponds with period of model
-UV-lamp lest luminous glow for several minutes
-Overall matching luminous in colour and fluffiness on dial, hands and markers
-Colour of luminous matches period of model (<1964 cappuccino vs yellow)
-Colour of luminous greenish indication for water damage
-Stains on dial due to damage Radium luminous
-Luminous paint completely inside surrounds
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_double_swiss_gmt.jpg
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_doubleswiss.jpg
Above clearly visible are the 2 generation luminous stamps, the one below, swiss only and the one above, stating now that the luminous is of new generation, < 0.25MSv. Below interesting close up that shows the swiss has been reprinted over the lume.
http://rolexpassionreport.com/wp-content/uploads/2016/10/swiss_lume_rolex.jpg
Then a close up of the compound of the luminous. It always make me feel like a cappuccino..
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_IMG_7561.jpg
Composition
-Cracked dial when tilted in light
-Magnify gilt lettering for correct application
-Glossy dial corresponds with period of model
-Matte dial corresponds with period of model
-Tropical dial corresponds with period of model
-Tropical dial with intact luminous
-Rolex print under/over lacquer layer
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6542_nos_dial.jpg
Above flawless glossy gilt radium dial and below a sunburned cracked spider dial…
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_spider_smallcrown_rolex_5508.jpg
BEZEL
-Ribbed edge of fluted bezel matches period of model
-Is the inlay original and matching the all over patina.
-Faded inlay matches dial and luminous, often inlays get changed.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6542_nos_insert.jpg
Bezel, insert, red triangle, bevel, crown guards, big, small crown…
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_redtriangle_rolex.jpg
The flat bezel for the Ref 6541 has specially been made for the U.S. market
http://rolexpassionreport.com/wp-content/uploads/2012/01/6541Milgauss_flatbezel_tropical.jpg
Bracelet
-Is the bracelet having any stretch?
-Have any links been removed?
-Is the inside of each rivet in the bracelet un bended?
-Are the screws used on the side to remove the link?
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6542_nos_bracelet.jpg
How do the bevels look? Round, worn, polished? If the bevel looks brand new, while the dial is not, something is wrong. If it is polished, then by whom? Rolex during service or an independent watchmaker? Certainly a trigger to look for replacement parts. Check below the stunning work LA Watch Works did…
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_polished_unplished.jpg
Here’s a summery from the checklist to determine the condition of your vintage Rolex:
Case Condition
-Magnify the matt parts of the case
-Magnify lugs
-Magnify bevelled edges between matt part and middle case
-Case back engravings worn out
-Hallmarks on back of lugs worn out but fresh case
-Satin polish: difference case back inner circle and outer rim
-Missing straight fine lines
-Missing sharpness on edges of lug holes
Wear indicators case side
-Original crown or replacement
-Replacement crown periodically correct
-Magnify pushers if present
-Magnify top left lug for heaviest wear (left wrist watch wearers)
-Magnify below lugs for end link scratches
-Magnify below lugs for dirt/dust
Wear indicators case back
-Magnify screw thread for frequent opening of case
-Original rubber sealing ring present
-Original rubber sealing ring or replacement
-Tarnish on screw thread
-Magnify case back for service codes
Wear indicators glass
-Original crystal?
-If original, is there any ‘icing” visible
-Is it a later service crystal with sharp edge
-Correct crystal type corresponds with model
Wear indicators movement
-Patina movement corresponds with patina watch
-Magnify screw near crown for damage, those are often used to get the movement out of the case
-Magnify the screws that hold the movement in it’s place, in below example at the edge in the middle of
the lugs.
-Magnify small screws for tarnish and if they have been used. Often a used one will show you burr on
the screw.
-Examine the screw thread. Often the rubber seal shows you wear. Also salt water will leave marks
clearly visible.
Serial Number
-Serial Number present
-Magnify Serial Number for clear engraving
-Worn out Serial Number corresponds with worn out case
-Serial Number matching with model
-Serial Number matching with production date inside case back
Reference Number
-Reference Number present
-Magnify Reference Number for clear engraving
-Worn out Reference Number corresponds with worn out case
-Reference Number inside case back matching with number in between lugs
-Reference Number matching with model
DIAL
Luminous
-Type of luminous matching with period of model:
-Swiss print with Radium luminous
-Swiss + ! with lower Radium luminous
-Swiss + _ with Tritium luminous
-Magnify for Golden Swiss, white Swiss, double Swiss corresponds with period of model
Swiss – T<25 / T-Swiss-T / T-Swiss-T<25 corresponds with period of model
-UV-lamp lest luminous glow for several minutes
-Overall matching luminous in colour and fluffiness on dial, hands and markers
-Colour of luminous matches period of model (<1964 cappuccino vs yellow)
-Colour of luminous greenish indication for water damage
-Stains on dial due to damage Radium luminous
-Luminous paint completely inside surrounds
Composition
-Cracked dial when tilted in light
-Magnify gilt lettering for correct application
-Glossy dial corresponds with period of model
-Matte dial corresponds with period of model
-Tropical dial corresponds with period of model
-Tropical dial with intact luminous
-Rolex print under/over lacquer layer
BEZEL
-Ribbed edge of fluted bezel matches period of model
-Is the inlay original and matching the all over patina.
-Faded inlay matches dial and luminous, often inlays get changed.
Bracelet
-Is the bracelet having any stretch?
-Have any links been removed?
-Is the inside of each rivet in the bracelet un bended?
-Are the screws used on the side to remove the link?
I hope my checklist to determine the condition of your vintage Rolex will helped you!
Cheers,:dr::dr:
Philipp
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_2508_black.jpg
Original article on RPR: http://rolexpassionreport.com/21767/checklist-to-determine-your-vintage-rolex-condition/
http://rolexpassionreport.com/wp-content/uploads/2016/10/slider_checklist_value_vintage_rolex.jpg
CHECKLIST to determine the condition of your vintage Rolex.
Before even considering zooming in on details, your first look should always be at the so- called matching all over patina. If a certain part of the watch, e.g. the case, shows clear traces of wear and tear, this should match with the condition of the watch in other places such as the dial, inlay, etc.
If something is not right appearance wise, then this is a clear giveaway the watch has been serviced or has been messed with to cover up its authenticity and originality. To make your assessment easier, I’ve composed a checklist of things to look out for when analysing a vintage Rolex. The list is broken down in case, dial and bezel parts. In my “Vintage Rolex Buyers Guide” you find all details per categorie.
If you systematically work through the list of details, you should be able to come up with a straightforward conclusion on the condition and originality of the watch at hand. At the end of this article you find an overview of the checklist!
Determining originality
Let’s take a closer look at the case to determine the originality of the watch and its condition. Many factors may influence if a case is still in an original state and what has been done to it by wearing and/or servicing it. Eying the case and comparing it with the rest of the watch, the challenge is to spot any discrepancies in the story the watch might tell you. Experience over the years has taught me that even a heavily worn watch always keeps its original shape. Obviously, there will be traces of wear at the edges but in general the shape should still be ok.
It’s all about the polish
One of the first things to look for is if the case has been polished. An unpolished case is more and more becoming a rare find these days, because it means the watch most likely has never been serviced. Polishing was part of service maintenance and as each watch officially had to be serviced regularly due to the replacement of lubricating oil inside the movement, many watches probably will have been serviced at one point in time. The purpose of servicing a watch was also to maintain the high standard Rolex always aimed for.
CASE
-Magnify the matt parts of the case
-Magnify lugs, font and back
-Magnify bevelled edges between matt part and middle case
-Case back engravings worn out
-Hallmarks on back of lugs worn out but fresh case
-Satin polish: difference case back inner circle and outer rim
-Missing straight fine lines
-Missing sharpness on edges of lug holes
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_How_to_polish_rolex.jpg
Unpolished
In case you are not sure how a certain reference should look like unpolished, take a close look at the matte part of the watch with a suitable magnifier. The matte parts will tell you if a watch has been polished or not. Below I will post some pictures from unused vintage Rolex so you can compare yours with. Here’s a unpolished like new small crown Ref 5508. Focus on the edges…
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_5508_unpolished_smallcrown_rolex.jpg
Every angle is still sharp, the side from the bezel, no marks on the crown or side of the case and also not on chamfer of the bevel.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_smallcrown_5508_unpolished_rolex.jpg
In case you are not sure how a certain reference should look like unpolished, take a close look at the matte part of the watch with a suitable magnifier. The matte parts will tell you if a watch has been polished or not…
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_unpolished_5508_submariner_rolex.jpg
A unused bracelet is still stiff, you need to bend the links. When removing the band with the push pins before polishing, it will always leave trace marks on the case. That is why the lugs are often sealed with tape before band removal. A clear sign of a service polish are the drilled lug holes, or better yet the sharpness of the lug hole edges. Because once polished, these lug holes will lose the original sharp edges.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_NOS_5508_submariner_rolex.jpg
Following is a GMT Ref 6542 also unpolished and unused. Hard to believe that these almost 60 year old Rolex have been tucked away and now see the daylight. In a scale of impossible to find these unused miracles are listing top position. Collectors grail.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6542_nos_bevel.jpg
Another part to check if a watch has been polished are the chamfers, the bevelled edges between the matte part and the middle case. Tool watches like the Daytona or dresswatches like the DateJust and Daydate did not have chamfers. You will only find them on the Submariner , Milgaus, GMT-Master and Explorer II. Perhaps because of this rarity and value, bevels are particularly loved by vintage collectors. A bevel was merely for esthetical purposes. Each model had its own bevel, the bevel on the GMT-Master was a bit smaller than the Submariner one. This has to do with the fact that the Submariner model was thicker than the GMT-Master and the Submariner winding crown larger.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_polished_rolex.jpg
Little less rare are those unused, NOS (New Old Stock) Rolex from the 70-80-ids. Here’s a NOS Ref 6263 Daytona. Note the sharp bezel and all edges. There are professional polishers who take the whole watch apart when trying to polish it back to Rolex standard. This will inevitably cause loss of material, unless the polishing has been done very lightly. Not easy, as it requires highly developed polishing skills because you only get one shot. If it goes wrong, the transition in polish is clearly visible. But if you get it right, it is harder to detect with the naked eye.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_unpolished_rolex_cosmograph_6263.jpg
Another indicator if a watch has been polished or not, is by looking at the fine lines on a watch. If these are not straight, the polishing has been done by hand. Unpolished watches only have a manufacture polish, meaning the case has a satin polish that was done at the Rolex factory before all parts were assembled
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6263_rolex_daytona_unpolished.jpg
Every place where wear and tear could happen is still unused, the crowns, the case back, the lugs, the sides, bracelet, crystal. If you compare the case with the band, you will often see a difference in finish because the band is easier to polish than the case. The lugs are especially difficult to handle, so this is an area that requires extra attention with your magnifier. While attempting to make the case matte again, there will always be a 1mm spot against the edge, impossible for a polishing machine to reach. In fact, you could only do a proper polishing job by taking the whole watch apart.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6263_unpolsihed_rolex_daytona.jpg
Wear indicators case side
-Original crown or replacement
-Replacement crown periodically correct
-Magnify pushers if present
-Magnify top left lug for heaviest wear (left wrist watch wearers)
-Magnify below lugs for end link scratches
-Magnify below lugs for dirt/dust
http://rolexpassionreport.com/wp-content/uploads/2012/02/16808_nos_061.jpg
A used but unpolished gold Rolex Submariner Ref 1680 nipple dial. With gold cases it’s very easy to see if they are polished or not. One complicating factor in assessing the polishing of a case, is that the satin factory polish has become more coarse over the years, if you compare models of the 1950s/1960s/1970s. I believe this has to do with the fact that production numbers rose rapidly and less time was spent on the finish of a watch due to the introduction of machine polish and laser check.
http://rolexpassionreport.com/wp-content/uploads/2012/02/16808_nos_02.jpg
When polished, the back of the lugs will often have the same round finish as the case. You would expect this finish on the inner circle of the case back as well, but this will be sealed with tape during polishing. Still, you can always feel the difference between the factory satin polish and service polish if you go from the inner circle to the outer polished rim.
Wear indicators case back
-Magnify screw thread for frequent opening of case
-Original rubber sealing ring present
-Original rubber sealing ring or replacement
-Tarnish on screw thread
-Magnify case back for service codes
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_IMG_3638.jpg
In below ref 6200 Big Crown case back you don’t find any little service marks engraved as you see above, instead you see that the automatic rotor left a circled mark in the case back.
http://rolexpassionreport.com/wp-content/uploads/2016/05/RPR_6200_caseback_RPR.jpg
Wear indicators glass
-Original crystal?
-If original, is there any ‘icing” visible
-Is it a later service crystal with sharp edge
-Correct crystal type corresponds with model
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6200-PST-LR-25.jpg
Above original Crystal on the left with lots of radium dust in there, be careful!
http://rolexpassionreport.com/wp-content/uploads/2016/01/RolexCrystal_19.jpg
In below A/6538 Military Bg Crown you see the ‘icing’ in the crystal..
http://rolexpassionreport.com/wp-content/uploads/2016/02/RPR_Iced_A6538.jpg
Wear indicators movement
-Patina movement corresponds with patina watch
-Magnify screw near crown for damage, those are often used to get the movement out of the case
-Magnify the screws that hold the movement in it’s place, in below example at the edge in the middle of
the lugs.
-Magnify small screws for tarnish and if they have been used. Often a used one will show you burr on
the screw.
-Examine the screw thread. Often the rubber seal shows you wear. Also salt water will leave marks clearly visible.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6542_nos.jpg
Above the unused Ref 6542 case back inside and movement, which still looks like new. Below a patinated and used movement..
http://rolexpassionreport.com/wp-content/uploads/2016/05/RPR_6200_movement_RPR.jpg
Serial Number
-Serial Number present
-Magnify Serial Number for clear engraving
-Worn out Serial Number corresponds with worn out case
-Serial Number matching with model
-Serial Number matching with production date inside case back
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_1665_serialnumber.jpg
Reference Number
-Reference Number present
-Magnify Reference Number for clear engraving
-Worn out Reference Number corresponds with worn out case
-Reference Number inside case back matching with number in between lugs
-Reference Number matching with model
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_IMG_5440.jpg
DIAL
Luminous
-Type of luminous matching with period of model:
-Swiss print with Radium luminous
-Swiss + ! with lower Radium luminous
-Swiss + _ with Tritium luminous
-Magnify for Golden Swiss, white Swiss, double Swiss corresponds with period of model
Swiss – T<25 / T-Swiss-T / T-Swiss-T<25 corresponds with period of model
-UV-lamp lest luminous glow for several minutes
-Overall matching luminous in colour and fluffiness on dial, hands and markers
-Colour of luminous matches period of model (<1964 cappuccino vs yellow)
-Colour of luminous greenish indication for water damage
-Stains on dial due to damage Radium luminous
-Luminous paint completely inside surrounds
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_double_swiss_gmt.jpg
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_doubleswiss.jpg
Above clearly visible are the 2 generation luminous stamps, the one below, swiss only and the one above, stating now that the luminous is of new generation, < 0.25MSv. Below interesting close up that shows the swiss has been reprinted over the lume.
http://rolexpassionreport.com/wp-content/uploads/2016/10/swiss_lume_rolex.jpg
Then a close up of the compound of the luminous. It always make me feel like a cappuccino..
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_IMG_7561.jpg
Composition
-Cracked dial when tilted in light
-Magnify gilt lettering for correct application
-Glossy dial corresponds with period of model
-Matte dial corresponds with period of model
-Tropical dial corresponds with period of model
-Tropical dial with intact luminous
-Rolex print under/over lacquer layer
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6542_nos_dial.jpg
Above flawless glossy gilt radium dial and below a sunburned cracked spider dial…
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_spider_smallcrown_rolex_5508.jpg
BEZEL
-Ribbed edge of fluted bezel matches period of model
-Is the inlay original and matching the all over patina.
-Faded inlay matches dial and luminous, often inlays get changed.
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6542_nos_insert.jpg
Bezel, insert, red triangle, bevel, crown guards, big, small crown…
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_redtriangle_rolex.jpg
The flat bezel for the Ref 6541 has specially been made for the U.S. market
http://rolexpassionreport.com/wp-content/uploads/2012/01/6541Milgauss_flatbezel_tropical.jpg
Bracelet
-Is the bracelet having any stretch?
-Have any links been removed?
-Is the inside of each rivet in the bracelet un bended?
-Are the screws used on the side to remove the link?
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_6542_nos_bracelet.jpg
How do the bevels look? Round, worn, polished? If the bevel looks brand new, while the dial is not, something is wrong. If it is polished, then by whom? Rolex during service or an independent watchmaker? Certainly a trigger to look for replacement parts. Check below the stunning work LA Watch Works did…
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_polished_unplished.jpg
Here’s a summery from the checklist to determine the condition of your vintage Rolex:
Case Condition
-Magnify the matt parts of the case
-Magnify lugs
-Magnify bevelled edges between matt part and middle case
-Case back engravings worn out
-Hallmarks on back of lugs worn out but fresh case
-Satin polish: difference case back inner circle and outer rim
-Missing straight fine lines
-Missing sharpness on edges of lug holes
Wear indicators case side
-Original crown or replacement
-Replacement crown periodically correct
-Magnify pushers if present
-Magnify top left lug for heaviest wear (left wrist watch wearers)
-Magnify below lugs for end link scratches
-Magnify below lugs for dirt/dust
Wear indicators case back
-Magnify screw thread for frequent opening of case
-Original rubber sealing ring present
-Original rubber sealing ring or replacement
-Tarnish on screw thread
-Magnify case back for service codes
Wear indicators glass
-Original crystal?
-If original, is there any ‘icing” visible
-Is it a later service crystal with sharp edge
-Correct crystal type corresponds with model
Wear indicators movement
-Patina movement corresponds with patina watch
-Magnify screw near crown for damage, those are often used to get the movement out of the case
-Magnify the screws that hold the movement in it’s place, in below example at the edge in the middle of
the lugs.
-Magnify small screws for tarnish and if they have been used. Often a used one will show you burr on
the screw.
-Examine the screw thread. Often the rubber seal shows you wear. Also salt water will leave marks
clearly visible.
Serial Number
-Serial Number present
-Magnify Serial Number for clear engraving
-Worn out Serial Number corresponds with worn out case
-Serial Number matching with model
-Serial Number matching with production date inside case back
Reference Number
-Reference Number present
-Magnify Reference Number for clear engraving
-Worn out Reference Number corresponds with worn out case
-Reference Number inside case back matching with number in between lugs
-Reference Number matching with model
DIAL
Luminous
-Type of luminous matching with period of model:
-Swiss print with Radium luminous
-Swiss + ! with lower Radium luminous
-Swiss + _ with Tritium luminous
-Magnify for Golden Swiss, white Swiss, double Swiss corresponds with period of model
Swiss – T<25 / T-Swiss-T / T-Swiss-T<25 corresponds with period of model
-UV-lamp lest luminous glow for several minutes
-Overall matching luminous in colour and fluffiness on dial, hands and markers
-Colour of luminous matches period of model (<1964 cappuccino vs yellow)
-Colour of luminous greenish indication for water damage
-Stains on dial due to damage Radium luminous
-Luminous paint completely inside surrounds
Composition
-Cracked dial when tilted in light
-Magnify gilt lettering for correct application
-Glossy dial corresponds with period of model
-Matte dial corresponds with period of model
-Tropical dial corresponds with period of model
-Tropical dial with intact luminous
-Rolex print under/over lacquer layer
BEZEL
-Ribbed edge of fluted bezel matches period of model
-Is the inlay original and matching the all over patina.
-Faded inlay matches dial and luminous, often inlays get changed.
Bracelet
-Is the bracelet having any stretch?
-Have any links been removed?
-Is the inside of each rivet in the bracelet un bended?
-Are the screws used on the side to remove the link?
I hope my checklist to determine the condition of your vintage Rolex will helped you!
Cheers,:dr::dr:
Philipp
http://rolexpassionreport.com/wp-content/uploads/2016/10/RPR_2508_black.jpg
Original article on RPR: http://rolexpassionreport.com/21767/checklist-to-determine-your-vintage-rolex-condition/